Strix Systems Access/One Network PTxP-6600, Point-to-Point or Point-to-Multi-Point equipment, powered by Strix Edge™ and MIMO techniques is our highest performance, full-duplex, configurable and cost effective wireless network extensions for the longest reach of an outdoor wireless network in LOS or NLOS deployments
Strix Systems Access/One Network PTxP-6600, Point-to-Point or Point-to-Multi-Point equipment, powered by Strix Edge™ and MIMO techniques is our highest performance, full-duplex, configurable and cost effective wireless network extensions for the longest reach of an outdoor wireless network in LOS or NLOS deployments.
Strix PTxP-6600 is a customized solution specifically tuned for high-performance long-range network extensions. It is highly optimized yet flexible and configurable solution to tune several parameters to suit the most demanding situations. It supports a broad range of voice, video and data applications delivering the highest performance.
Strix Systems PTxP-6600 supports centralized provisioning and easy remote manageability via CLI, HTTP and SNMP. The device also supports remote firmware updates and includes a number of monitoring, trending and troubleshooting from a centralized NOC. It also supports standard as well as proprietary security features for highest security. The Strix PTxP-6600 allows dynamic channel assignment, automatic power control and data rate selection for greatest RF spectrum efficiency, supports event logging and statistics, Layer-2 and Layer-3 NAT monitors, client monitor, rogue device detection and reports signal strength history.
Wireless Specifications
- Wireless Standards – 802.11 b/g/n/ac/ax
- Frequency Bands
- 802.11G/N/AX
- 2.4 – 2.462 GHz
- 802.11A/N/AC/AX
- 5.15 – 5.25 GHz
- 5.25 – 5.35 GHz
- 5.725 – 5.850 GHz
- Receiver Sensitivity Rates -90dBm (max)
- Transmit Power
- Up to 20 dBm
- Automatic Tx Power Control
- Modulations
- 802.11a/g: 16-QAM, QPSK, BPSK
- 802.11b: CCK, DQPSK, DBPSK
- 802.11n: 16-QAM, 64-QAM, QPSK, BPSK
- 802.11ac: 16-QAM, 64-QAM, 256-QAM,QPSK, BPSK
- 802.11ax: 1024-QAM
- Supported Channel Widths
- Up to 160 MHz
Interfaces and Ports
- 1 x 10/100/1000/2500 Mbps Ethernet port
- External N-connectors
Models
- PTxP-6600-30: 6 radio, dual band, AC/DC power
- PTxP-6600-20: 4 radio, dual band, AC power
Electrical
- 100~240VAC, 50-60 Hz, 1.0A Max
- 100~240VAC, 50-60 Hz, 1.0A Max 12-24 VDC, 9.0A Max (PTxP6600-30 only)
- Power : 10-54W (Typical Power: 9-34W)
Environmental
- Operating Temperature: -20°C to 60°C
- Storage Temperature: -40°C to 80°C
- Humidity: 95% Non-condensing
Physical
- Dimension: 12”x10”x4.8 / 13.7”x11.8”x6.8”
- Weight: 4.9Kg/7Kg
- Pole Mount / Wall Mount
Features
- Concurrent 5 & 2.4G dual band Support
- Up to 2400 / 1100 Mbps WLAN RF capacity
- Bridge Mode
- WDS/L2-NAT
- 16 SSIDs per Radio
- 802.1q VLAN Queuing
- External Antenna Provision
- Configurable Distance
- Long distance Point-to-Point or Point-to-Multi-Point wireless links
Remote and Local Management
- HTTP, HTTPS, Telnet, SSH, SNMP, FTP
- TFTP, SCP, NTP
- Remote Management and Provisioning
- Bandwidth Provisioning
Monitoring/Troubleshooting
- Clients, Wireless neighbor monitor
- Event Logging and Statistics
- Layer 2/3 NAT Monitor
- Signal Strength Indicator
- Remote Diagnostic utilities
Security & Encryption
- 802.11i Security: WPA-PSK, WPA2-PSK
- AES and TKIP encryption
- WPA3, WPA2 Enterprise
- Wired Equivalent Privacy (WEP)
- SSID Hiding, Management Frame Protection
- MAC Address Access Control Lists
- Client Isolation, Inactivity timeout
- Management VLAN
- Firewall, WIDS features
Warranty
- 12 Months Hardware, Software Support
- Extended Warranty available at extra charge
- Extended Support available at extra charge